Oregon Analog - PHV / PHS Series

These high voltage probes have a x100 attenuation ratio, are of coaxial design, and have the ability to measure voltage and impulse values up to 6.0 kV up to 400 MHz.

They are designed per IEC 61010-0-031 to maximize the breakdown voltage. The 5 and 6 kV peak pulse models are insulated internally using special materials.

PHV probes are supplied in their individual rigid case.

The included accessory pack for the PHV series, contains 1 each - Spring Contact Tip 0.8 mm (mounted in the probe), Rigid Tip 0.8 mm, Sprung Hook III long Red, BNC-Adapter long, Red Insulating Cap long, a 9" (22 cm) Ground Lead, Standard Trimmer Tool, 1 each Safety Alligator Clip Red and Black, 1 Flexible Safety 4 mm Adapter, and 1 Safety Ground Lead with 4 mm Plug.

PHV / PHS Series Probe Specification

Model	Attenuation	Input Imp. R (MOhm) C (pf)	Bandwidth MHz (-3 db)	Rise Time (ns)	Cable Length (m)	Compensation (pf)	Max Input Voltage [kV] CAT II VDC Impulse ACrms incl Peak pkAC	Part No.
PHV 621	x100	50 <5.5	400	<0.9	1.2	10 ... 50	1.5 2.0 2.5	860-621-000
PHV 622	x100	50 <6	300	<1.2	2.0	10 ... 50	1.5 2.0 2.5	860-622-000
****
PHS 661	x10/100	5/50 <17/5.5	200/300	<1.8/1.2	1.2	15 ... 50	0.3 1.0 1.2	860-661-000
PHS 662	x10/100	5/50 <18/6	150/250	<2.4/1.4	2.0	15 ... 50	0.3 1.0 1.2	860-662-000
****
PHV 641-L	x100	50 <6	380	<0.95	1.2	10 ... 50	2.0 3.0 4.0	86L-641-000
PHV 642-L	x100	50 <6.5	300	<1.2	2.0	10 ... 50	2.0 3.0 4.0	86L-642-000
PHV 643-L	x100	50 <7	150	<2.4	3.0	15 ... 55	2.0 3.0 4.0	86L-643-000
****
PHV 651-L	x100	50 <6.5	380	<0.95	1.2	10 ... 50	2.4 3.5 5.0	86L-651-000
PHV 652-L	x100	50 <7	300	<1.2	2.0	10 ... 50	2.4 3.5 5.0	86L-652-000
PHV 653-L	x100	50 <7.5	150	<2.4	3.0	15 ... 55	2.4 3.5 5.0	86L-653-000
****
PHV 661-L	x100	50 <6.5	380	<0.95	1.2	10 ... 50	2.8 4.0 6.0	86L-761-000
PHV 662-L	x100	50 <7	300	<1.2	2.0	15 ... 50	2.8 4.0 6.0	86L-762-000
PHV 663-L	x100	50 <7.5	150	<2.4	3.0	15 ... 55	2.8 4.0 6.0	86L-763-000

PHV Series Derating Curves

Oregon Analog