Oregon Analog - PMP + PMV Series

The PMP and PMV series of probes are of Coaxial design, modular construction, with a coaxial reed switches and interchangeable probe tips. With a maximum input voltage of 600 VDC Category I and 300 VDC Category II, it is used with older analog oscilloscopes having bandwidth up to 500 MHz. Probe compensation range for PMP series is from 10 to 45 pF and the PMV series 8 to 30 pF. The multiple HF adjustment allows an optimum adjustment on the oscilloscope.

The included accessory pack contains 1 each - Spring Contact Tip 0.8 mm (mounted in the probe), Rigid Tip 0.8 mm, Sprung Hook II long black, BNC-Adapter, Insulating Cap, IC-Insulating Cap, 9" (22 cm) Ground Lead, Standard Trimmer Tool, and a Ground Spring "dogleg".

Probes can be ordered with additional cable length on request.

PMP + PMV Series - Standard Probe Specification

Model	Attenuation	Input Imp. R (MOhm) C (pf)	Bandwidth MHz (-3 db)	Rise Time (ns)	Cable Length (m)	Compensation (pf)	Max Input Voltage CAT I CAT II VDC incl VDC incl pkAC pkAC	Part No.
PMP 301	x1	1 < 38	40	< 9	1.2	-	600 300	830-301-000
PMP 302	x1	1 < 58	25	< 14	2.0	-	600 300	830-302-000
PMP 311	x10	10 < 10	300	< 1.2	1.2	10 ... 45	600 300	830-311-000
PMP 312	x10	10 < 12	220	< 1.6	2.0	10 ... 45	600 300	830-312-000
PMP 321	x1 x10	1 < 40 10 < 10	30 300	< 12 < 1.2	1.2 2.0	- 10 ... 45	600 300 600 300	830-321-000
PMP 322	x1 x10	1 < 60 10 < 13	20 220	< 18 < 1.6	2.0 2.0	- 10 ... 45	600 300 600 300	830-322-000
****
PMV 511	x10	10 < 14	500	< 0.7	1.2	8 ... 30	600 300	850-511-000
PMV 512	x10	10 < 16	380	< 0.95	2.0	8 ... 30	600 300	850-512-000

Oregon Analog